601 mhz saw filter 26 mhz bandwidth part number SF0601BA03160S idt ? saw products ? 324 clark street, worcester, ma 01606, usa ? ph 1-508-852-5400 ? fax 1-508-852-8456 www.idt.com dsSF0601BA03160S rev - 02-dec- 2007 ecn 35690 page 1 of 3 description ? 601 mhz saw bandpass filter with 26 mhz bandwidth. ? 3.8 x 3.8 mm lcc package. ? rohs compliant. typical performance horizontal: frequency - center : 600 mhz span : 300 mhz vertical: magnitude : 10 db/div magnitude : 1 db/div group delay : 20 ns/div
601 mhz saw filter 26 mhz bandwidth part number SF0601BA03160S idt ? saw products ? 324 clark street, worcester, ma 01606, usa ? ph 1-508-852-5400 ? fax 1-508-852-8456 www.idt.com dsSF0601BA03160S rev - 02-dec- 2007 ecn 35690 page 2 of 3 specification parameter min typ max units nominal center frequency f c - 601 - mhz passband 588 - 614 mhz maximum insertion loss over the passband - 4.25 4.5 db absolute delay - 40 - ns rejection (0.3 to 506 mhz) 1 40 47 - db rejection (506 to 526 mhz) 1 38 39 - db rejection (526 to 575 mhz) 1 10 14 - db rejection (627 to 676 mhz) 1 10 11 - db rejection (676 to 696 mhz) 1 20 22 - db rejection (696 to 901 mhz) 1 40 42 - db rejection (901 to 1056 mhz) 1 40 43 - db amplitude variation over the passband - 0.9 1.5 db p-p group delay ripple in passband - 10 100 ns p-p source/load impedance 50 ohms temperature coefficient of frequency, tc 2 - -70 - ppm/ ? c ambient temperature (tref) - 23 - ? c notes: 1. absolute level 2. typical shift of filter frequency response with temperature is ? f = (t-t ref )*tc*fc. maximum ratings parameter min max units storage temperature range -45 85 ? c operating temperature range -20 55 ? c input power level - 10 dbm matching circuit notes ? 50 ohm single ended operation. ? matching components are not required.
601 mhz saw filter 26 mhz bandwidth part number SF0601BA03160S idt ? saw products ? 324 clark street, worcester, ma 01606, usa ? ph 1-508-852-5400 ? fax 1-508-852-8456 www.idt.com dsSF0601BA03160S rev - 02-dec- 2007 ecn 35690 page 3 of 3 package outline suggested footprint all specifications are believed to be accurate and reliable. ho wever, mnc reserves the right to make changes without notice. ? 2007 all rights reserved. iso 9001 registered package material: body: al 2 o 3 ceramic lid: kovar, ni plated terminations: au plating 1 m min, over a 1.3-8.9 m ni plating units: mm tolerances are 0.15 mm except where indicated. pad configuration: input: 2 output: 5 ground: 1, 3, 4, 6
|
